Custom Fencing

All our posts and rail fences are hand-selected to suit the needs of the project at hand. They are then processed using superior machinery and systems, to ensure a quick turnaround from the time of ordering*.

We cut the mortises into the posts so there is enough slack between the holes and rails to create curves, go over hills and down slopes, and create angles for setbacks or changes in the direction of the fence.

Each of our perfectly morticed holes offers through (intermediates and intersecting posts), halfway (ends, corner, or intersection posts), or cutting into the corner of a post for any 45° angles. The rails simply butt together in the centre of the posts, so no fixings are required.

The top of the posts can be cut into a range of designs, with our standard design chamfering on all four sides of the posts. It is important to cut the top to help seal the end grain and prevent checking (timber splitting) although we can leave them “raw” or square cut for a rustic style.

When it comes to our rails, they are available in a range of sizes. The most common length is 2.4m long. This length is a great all-rounder; proportionately divides bays of fencing, convenient rail length for milling processes and reduces the risks of warping, cracks, or twisting (some cupping of hardwood rails is normal and acceptable as it will not weaken the fence and enhances the look).

*subject to stock availability